Инструкция на принтер brother hl

инструкция на принтер brother hl
Some Brother machines have built-in drivers which support the basic functions. The unprintable areas may vary depending on the paper size or settings in the application you are using. Self-Diagnostic Rechecking the error after the power switch was turned OFF and then ON again because an error was detected by the center thermistor of the fuser unit.


Date published: 2017-03-14 Rated 5 out of 5 by My Boat 1958 from Easy to use Its easy to set up easy to use great printer for the price you pay highly recommend it Date published: 2017-03-13 HL-1210W Reviews — page 2. Connection failure of the panel Check the connection of the panel harness, harness and reconnect it if necessary. Step Cause Remedy… Page 81: Size Mismatch Error code 9000 Size Mismatch When printing from the MP tray, the size of paper set in the MP tray does not match the size specified by the driver. Error Refer Error Message Description codes Access Denied Failed to authenticate the print limit ID when 2-73 PC-print was executed.

Press Ctrl+F (Ctrl key and F key) at the same time. Page 69 Error code 5500 Replace Laser Printable pages set for the laser unit have reached the limit. (Printing does not stop.) Step Cause Remedy End of life of the laser unit Replace the laser unit. Step Cause Remedy Main PCB failure Replace the main PCB ASSY. 4.10.2 High-voltage power supply PCB failure Step Cause Remedy… Page 116: Troubleshooting For Other Problems 4.11 Troubleshooting for Other Problems 4.11.1 Machine is not turned ON — Connect the AC cord correctly. Page 133: Disassembly Flow Chart 8. DISASSEMBLY FLOW CHART Disassembly / Re-Assembly (second) 9.8 Side c. Page 104 Black horizontal stripes — Clean inside the machine and the corona wire of the drum unit. — The paper tray earth spring on the machine side may be dirty.

Похожие записи: